// CODE SNIPPET
[BS] A106.3.2.3 Other Lay-Up Patterns
JUMP TO FULL CODE CHAPTER
Lay-up patterns other than those specified in Sections A106.3.2.1 and A106.3.2.2 above are allowed if their performance can be justified.
Related Code Sections
A106.3.2.3 Seismic Strengthening Provisions for Unreinforced Masonry Bearing Wall Buildings, Other Lay-Up Patterns
Lay-up patterns other than those specified in Sections A106.3.2.1 and A106.3.2.2 above are allowed if their performance can be justified ...
Existing Building Code 2015 of Idaho > A1 Seismic Strengthening Provisions for Unreinforced Masonry Bearing Wall Buildings > A106 Materials Requirements > A106.3 Existing Unreinforced Masonry > A106.3.2 Lay-Up of Walls > A106.3.2.3 Other Lay-Up Patterns
2304.9.2 Wood, Layup Patterns
Lumber decking is permitted to be laid up following one of five standard patterns as defined in Sections 2304.9.2.1 through 2304.9.2.5. Other ...
Building Code 2018 of Idaho > 23 Wood > 2304 General Construction Requirements > 2304.9 Lumber Decking > 2304.9.2 Layup Patterns
2304.9.2 Wood, Layup Patterns
Lumber decking is permitted to be laid up following one of five standard patterns as defined in Sections 2304.9.2.1 through 2304.9.2.5. Other ...
Building Code 2015 of Idaho > 23 Wood > 2304 General Construction Requirements > 2304.9 Lumber Decking > 2304.9.2 Layup Patterns
10.7 Underground Piping, Requirement for Laying Pipe
into the trench using appropriate equipment and carefully examined for cracks or other defects while suspended above the trench. [ 24: 10.7.5 ...
Standard for the Installation of Sprinkler Systems 2013 of Idaho > 10 Underground Piping > 10.7 Requirement for Laying Pipe
R606.6.4.1.1 Wall Construction, Bonding Pattern
Fifty percent of the units at the intersection shall be laid in an overlapping masonry bonding pattern, with alternate units having a bearing ...
Idaho Residential Code (2020 Edition) > 6 Wall Construction > R606 General Masonry Construction > R606.6 Support Conditions > R606.6.4 Lateral Support > R606.6.4.1 Horizontal Lateral Support > R606.6.4.1.1 Bonding Pattern