// CODE SNIPPET
R702.5 Other Finishes
JUMP TO FULL CODE CHAPTER
Wood veneer paneling and hardboard paneling shall be placed on wood or cold-formed steel framing spaced not more than 16 inches (406 mm) on center. Wood veneer and hard board paneling less than 1/4-inch (6 mm) nominal thickness shall not have less than a 3/8-inch (10 mm) gypsum board or gypsum panel product backer. Wood veneer paneling not less than 1/4-inch (6 mm) nominal thickness shall conform to ANSI/HPVA HP-1. Hardboard paneling shall conform to CPA/ANSI A135.5.
Related Code Sections
R702.5 Wall Covering, Other Finishes
Wood veneer paneling and hardboard paneling shall be placed on wood or cold-formed steel framing spaced not more than 16 inches (406 mm) on center ...
(B) Equipment for General Use, Secured in Place
Cables shall be secured in place by nonmetallic frames or spreaders or other approved means while the concrete or other finish is applied ...
National Electrical Code 2017 of Kansas > 4 Equipment for General Use > 424 Fixed Electric Space-Heating Equipment > 424.44 Installation of Cables in Concrete or Poured Masonry Floors > (B) Secured in Place
(1) Equipment for General Use, Non-Type IC
combustible materials. The points of support and the trim finishing off the openings in the ceiling, wall, or other finished surface shall be permitted ...
National Electrical Code 2017 of Kansas > 4 Equipment for General Use > 410 Luminaires, Lampholders, and Lamps > 410.116 Clearance and Installation > (A) Clearance > (1) Non-Type IC
R608.4.3 Wall Construction, Exterior Wall Covering
Requirements for installation of masonry veneer, stucco and other finishes on the exterior of concrete walls and other construction details ...
Residential Code 2018 of Kansas > 6 Wall Construction > R608 Exterior Concrete Wall Construction > R608.4 Stay-In-Place Forms > R608.4.3 Exterior Wall Covering
E4004.8 Devices and Luminaires, Recessed Luminaire Clearance
combustible materials. The points of support and the finish trim parts at the opening in the ceiling, wall or other finished surface shall be permitted ...
Residential Code 2018 of Kansas > 40 Devices and Luminaires > E4004 Luminaire Installation > E4004.8 Recessed Luminaire Clearance