// CODE SNIPPET
430.44 Orderly Shutdown
JUMP TO FULL CODE CHAPTER
If immediate automatic shutdown of a motor by a motor overload protective device(s) would introduce additional or increased hazard(s) to a person(s) and continued motor operation is necessary for safe shutdown of equipment or process, a motor overload sensing device(s) complying with Part III of this article shall be permitted to be connected to a supervised alarm instead of causing immediate interruption of the motor circuit, so that corrective action or an orderly shutdown can be initiated.
Related Code Sections
430.44 Equipment for General Use, Orderly Shutdown
action or an orderly shutdown can be initiated ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 430 Motors, Motor Circuits, and Controllers > 430.44 Orderly Shutdown
Part II Special Equipment, Orderly Shutdown
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 685 Integrated Electrical Systems > II Orderly Shutdown
240.12 Wiring and Protection, Electrical System Coordination
Where an orderly shutdown is required to minimize the hazard(s) to personnel and equipment, a system of coordination based on the following two ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 240 Overcurrent Protection > 240.12 Electrical System Coordination
(3) Wiring Methods and Materials, 173 Percent Insulation Level
cannot be met Where an orderly shutdown is required to protect equipment and personnel Where the faulted section will be de-energized in an orderly ...
National Electrical Code 2020 of Minnesota > 3 Wiring Methods and Materials > 311 Medium Voltage Conductors and Cable > 311.10 Constructions and Applications > (C) Thickness of Insulation for Shielded Insulated Conductors > (3) 173 Percent Insulation Level
(4) Special Equipment, Duty Rating and Overload Protection on Platform Lift and Stairway Chairlift Motors
against overload in accordance with 430.33. Informational Note: For further information, see 430.44 for orderly shutdown ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 620 Elevators, Dumbwaiters, Escalators, Moving Walks, Platform Lifts, and Stairway Chairlifts > 620.61 Overcurrent Protection > (B) Overload Protection for Motors > (4) Duty Rating and Overload Protection on Platform Lift and Stairway Chairlift Motors