// CODE SNIPPET
R612.9.1 Optional Exterior Door Component Testing
JUMP TO FULL CODE CHAPTER
With the exception of HVHZ, exterior side-hinged door assemblies not covered by Section R612.3 shall be permitted to have the option to have the components of the assembly tested and rated for structural integrity in accordance with the following ANSI A250.13.
Following the structural testing of exterior door components, there shall be no permanent deformation of any perimeter frame or panel member in excess of 0.4 percent of its span after the load is removed. After each specified loading, there shall be no glass breakage, permanent damage to fasteners, hardware parts, or any other damage that causes the door to be inoperable, as applicable.
Related Code Sections
R612.9.1 Wall Construction, Optional Exterior Door Component Testing
With the exception of HVHZ, exterior side-hinged door assemblies not covered by Section R612.3 shall be permitted to have the option to have ...
2014 FBC - Residential, 5th edition > 6 Wall Construction > R612 Exterior Windows and Doors > R612.9 Door Components > R612.9.1 Optional Exterior Door Component Testing
R609.10 Wall Construction, Door Components
agency, testing laboratory, or engineer and may be interchangeable in exterior door assemblies if the components provide equal or greater structural ...
2020 FBC - Residential, 7th edition > 6 Wall Construction > R609 Exterior Windows and Doors > R609.10 Door Components
R609.10 Wall Construction, Door Components
agency, testing laboratory, or engineer and may be interchangeable in exterior door assemblies if the components provide equal or greater structural ...
2017 FBC - Residential, 6th edition > 6 Wall Construction > R609 Exterior Windows and Doors > R609.10 Door Components
7.2.1.15.2* Means of Egress,
The inspection and testing interval for fire-rated and nonrated door assemblies shall be permitted to exceed 12 months under a written performance ...
NFPA 101 part of the 2020 FFPC, 7th edition > 7 Means of Egress > 7.2 Means of Egress Components > 7.2.1 Door Openings > 7.2.1.15 Inspection of Door Openings > 7.2.1.15.2*
1709.5 Special Inspections and Tests, Exterior Window and Door Assemblies
Exception: Custom doors. Custom (one-of-a-kind) exterior door assemblies shall be tested by an approved testing laboratory or be designed and engineered ...
2020 FBC - Building, 7th edition > 17 Special Inspections and Tests > 1709 Preconstruction Load Tests > 1709.5 Exterior Window and Door Assemblies