// CODE SNIPPET
1926.652(c)(2) Option (2)-Designs Using Manufacturer's Tabulated Data
JUMP TO FULL CODE CHAPTER
Design of support systems, shield systems, or other protective systems that are drawn from manufacturer's tabulated data shall be in accordance with all specifications, recommendations, and limitations issued or made by the manufacturer.
Manufacturer's specifications, recommendations, and limitations, and manufacturer's approval to deviate from the specifications, recommendations, and limitations shall be in written form at the jobsite during construction of the protective system. After that time this data may be stored off the jobsite, but a copy shall be made available to the Secretary upon request.
Deviation from the specifications, recommendations, and limitations issued or made by the manufacturer shall only be allowed after the manufacturer issues specific written approval.
Related Code Sections
1926.652(c)(2) Excavations, Option (2)-Designs Using Manufacturer's Tabulated Data
Design of support systems, shield systems, or other protective systems that are drawn from manufacturer's tabulated data shall be in accordance ...
OSHA 1926 Construction > P Excavations > 1926.652 Requirements for Protective Systems > 1926.652(c) Design of Support Systems, Shield Systems, and Other Protective Systems > 1926.652(c)(2) Option (2)-Designs Using Manufacturer's Tabulated Data
1926.652(c)(1) Excavations, Option (1)-Designs Using Appendices A, C and D
to this subpart. Designs for aluminum hydraulic shoring shall be in accordance with paragraph (c)(2) of this section, but if manufacturer's tabulated data ...
OSHA 1926 Construction > P Excavations > 1926.652 Requirements for Protective Systems > 1926.652(c) Design of Support Systems, Shield Systems, and Other Protective Systems > 1926.652(c)(1) Option (1)-Designs Using Appendices A, C and D
1926.652(b)(3) Excavations, Option (3)-Designs Using Other Tabulated Data
Designs of sloping or benching systems shall be selected from and be in accordance with tabulated data, such as tables and charts ...
OSHA 1926 Construction > P Excavations > 1926.652 Requirements for Protective Systems > 1926.652(b) Design of Sloping and Benching Systems > 1926.652(b)(3) Option (3)-Designs Using Other Tabulated Data
1926.652(c)(3) Excavations, Option (3)-Designs Using Other Tabulated Data
Designs of support systems, shield systems, or other protective systems shall be selected from and be in accordance with tabulated data ...
OSHA 1926 Construction > P Excavations > 1926.652 Requirements for Protective Systems > 1926.652(c) Design of Support Systems, Shield Systems, and Other Protective Systems > 1926.652(c)(3) Option (3)-Designs Using Other Tabulated Data
1926.652(b) Excavations, Design of Sloping and Benching Systems
and one-half horizontal to one vertical (34 degrees measured from the horizontal), unless the employer uses one of the other options listed below ...
OSHA 1926 Construction > P Excavations > 1926.652 Requirements for Protective Systems > 1926.652(b) Design of Sloping and Benching Systems