// CODE SNIPPET
1926.959(b)(3) Operation Without Outriggers
JUMP TO FULL CODE CHAPTER
If the work area or the terrain precludes the use of outriggers, the equipment may be operated only within its maximum load ratings specified by the equipment manufacturer for the particular configuration of the equipment without outriggers.
Related Code Sections
1926.959(b)(3) Electric Power Transmission and Distribution, Operation Without Outriggers
If the work area or the terrain precludes the use of outriggers, the equipment may be operated only within its maximum load ratings specified ...
OSHA 1926 Construction > V Electric Power Transmission and Distribution > 1926.959 Mechanical Equipment > 1926.959(b) Outriggers > 1926.959(b)(3) Operation Without Outriggers
1926.1404(q) Cranes & Derricks in Construction, Outriggers and Stabilizers
When the load to be handled and the operating radius require the use of outriggers or stabilizers, or at any time when outriggers or stabilizers ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1404 Assembly/Disassembly--General Requirements (Applies to All Assembly and Disassembly Operations) > 1926.1404(q) Outriggers and Stabilizers
1926.452(i) Scaffolds, Outrigger Scaffolds
The inboard end of outrigger beams, measured from the fulcrum point to the extreme point of anchorage, shall be not less than one and one-half times ...
OSHA 1926 Construction > L Scaffolds > 1926.452 Additional Requirements Applicable to Specific Types of Scaffolds > 1926.452(i) Outrigger Scaffolds
1926.1404(q)(6) Cranes & Derricks in Construction,
without using outriggers or stabilizers, the manufacturer's procedures must be met regarding truck wedges or screws ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1404 Assembly/Disassembly--General Requirements (Applies to All Assembly and Disassembly Operations) > 1926.1404(q) Outriggers and Stabilizers > 1926.1404(q)(6)
1926.1416(e)(5)(i) Cranes & Derricks in Construction,
measures: The operator must verify that the position of the outriggers or stabilizers is correct (in accordance with manufacturer procedures) before ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1416 Operational Aids > 1926.1416(e) Category II Operational Aids and Alternative Measures > 1926.1416(e)(5) > 1926.1416(e)(5)(i)