// CODE SNIPPET

1910.265(e)(5)(iv) Operating Speed of Live Rolls

OSHA 1910 General Industry > R Special Industries > 1910.265 Sawmills > 1910.265(e) Log Breakdown and Related Machinery and Facilities > 1910.265(e)(5) Edgers > 1910.265(e)(5)(iv) Operating Speed of Live Rolls

JUMP TO FULL CODE CHAPTER

Live rolls and tailing devices in back of edger shall operate at a speed not less than the speed of the edger feed rolls.

Related Code Sections

1910.265(e)(5)(iv) Special Industries, Operating Speed of Live Rolls

Live rolls and tailing devices in back of edger shall operate at a speed not less than the speed of the edger feed rolls ...

1910.265(e)(2)(iii) Special Industries, Single Circular Head Saws

Circular head saws shall not be operated at speeds in excess of those specified by the manufacturer. Maximum speed shall be etched on the saw ...

OSHA 1910 General Industry > R Special Industries > 1910.265 Sawmills > 1910.265(e) Log Breakdown and Related Machinery and Facilities > 1910.265(e)(2) Head Saws > 1910.265(e)(2)(iii) Single Circular Head Saws

1910.265(e)(2) Special Industries, Head Saws

saws shall not be operated at speeds in excess of those recommended by the manufacturer ...

OSHA 1910 General Industry > R Special Industries > 1910.265 Sawmills > 1910.265(e) Log Breakdown and Related Machinery and Facilities > 1910.265(e)(2) Head Saws

1910.216(f) Machinery and Machine Guarding, Stopping Limits

All measurements on mills and calenders shall be taken with the rolls running empty at maximum operating speed. Stopping distances shall be expressed ...

OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.216 Mills and Calenders in the Rubber and Plastics Industries > 1910.216(f) Stopping Limits

1910.216(f)(1) Machinery and Machine Guarding, Determination of Distance of Travel

All measurements on mills and calenders shall be taken with the rolls running empty at maximum operating speed. Stopping distances shall be expressed ...

OSHA 1910 General Industry > O Machinery and Machine Guarding > 1910.216 Mills and Calenders in the Rubber and Plastics Industries > 1910.216(f) Stopping Limits > 1910.216(f)(1) Determination of Distance of Travel

Calculate Code Requirements

Code Calculators automatically generate a detailed list of requirements.

Upgrade to premium to access these features.

LEARN MORE

About UpCodes

UpCodes provides an intuitive resource to navigate building regulations.

Codes are organized by jurisdiction to help you understand which regulations apply to your project.

Find Your Codes