1705.2.3 Open-Web Steel Joists and Joist Girders

Special inspections of open-web steel joists and joist girders in buildings, structures and portions thereof shall be in accordance with Table ...

, girders, open web joist and joist girders support a concrete slab or concrete slab on metal deck that is attached to the beam or girder with not less than 3 / 8 -inch-diameter (9.5 mm) headed shear studs, at a spacing of not more than 12 inches (305 mm) on center, averaged over the length of the member, or other attachment having equivalent shear strength, and the slab contains continuous distributed reinforcement in each of two orthogonal directions with an area not less than 0.0015 times the concrete area, the nominal axial tension strength of the end connection shall be permitted to be taken as half the required vertical shear strength for ASD or one-third of the required shear strength for LRFD, but not less than 10 kips (45 kN). Frame structures constructed with a structural steel frame ...

Each end of "K" series steel joists shall be attached to the support structure with a minimum of two ⅛-inch (3 mm) fillet welds 1 inch (25 mm) long or with two ½-inch (13 mm) bolts, or the equivalent ...

Painting of structural steel elements shall be in accordance with AISC 360. Painting of open-web steel joists and joist girders shall ...

of open-web steel joists and joist girders in buildings, structures and portions thereof shall be in accordance with Table 1705.2.3. TABLE 1705.2.3 ...