// CODE SNIPPET
77-23 Open Space Ratio
JUMP TO FULL CODE CHAPTER
The open space required for such zoning lot shall be computed separately for each portion of the zoning lot under the applicable regulations of the underlying districts. The total open space provided on the zoning lot shall not be less than the sum of such required open space so computed.
For portions of the zoning lot located in districts that have required open space ratios, the required open space for each such portion is computed by multiplying the lot area of that portion, by the maximum floor area ratio permitted for the applicable type of building or buildings, by the minimum open space ratio required at that floor area ratio, divided by 100.
For portions of the zoning lot located in other districts that do not have required open space ratios but do have required open space, the required open space for each such portion is computed by multiplying the lot area of that portion, by the minimum percentage of open space required, divided by 100.
For portions of the zoning lot located in districts that do not have a required open space ratio or required open space, no open space shall be required but any required yards, or publicly accessible open area provided, for which a floor area or lot area bonus is taken, shall be in addition to the amount of open space required on the remaining portion of the zoning lot. No open area may be counted twice in fulfilling these requirements.
The required open space may be located anywhere on the zoning lot subject to all other regulations of this Resolution and provided that the open space ratio for any portion of the zoning lot within one district shall not be less than 60 percent of the required open space ratio for that district.
Related Code Sections
Section 704 Combustion Air, Combined Use of Inside and Outdoor Air (Condition 1)
number, location and ratios of openings connecting the space with the outdoor air shall comply with Sections 704.1.1 through 704.1.4 ...
NYC Mechanical Code 2008 > 7 Combustion Air > 704 Combined Use of Inside and Outdoor Air (Condition 1)
Section 704 Combustion, Ventilation, and Dilution Air, Combined Use of Inside and Outdoor Air (Condition 1)
704.1.5. The number, location and ratios of openings connecting the space with the outdoor air shall comply with Sections 704.1.1 through 704.1.4 ...
NYC Mechanical Code 2014 > 7 Combustion, Ventilation, and Dilution Air > 704 Combined Use of Inside and Outdoor Air (Condition 1)
Section 704 Combustion, Ventilation, and Dilution Air, Combined Use of Inside and Outdoor Air (Condition 1)
704.1.5. The number, location and ratios of openings connecting the space with the outdoor air shall comply with Sections 704.1.1 through 704.1.4 ...
NYC Mechanical Code 2022 > 7 Combustion, Ventilation, and Dilution Air > 704 Combined Use of Inside and Outdoor Air (Condition 1)
304.7 General Regulations, Combination Indoor and Outdoor Combustion Air
Where used, openings connecting the interior spaces shall comply ...
NYC Fuel Gas Code 2014 > 3 General Regulations > 304 Combustion, Ventilation and Dilution Air > 304.7 Combination Indoor and Outdoor Combustion Air
304.7 General Regulations, Combination Indoor and Outdoor Combustion Air
Where used, openings connecting the interior spaces shall comply ...
NYC Fuel Gas Code 2022 > 3 General Regulations > 304 Combustion, Ventilation and Dilution Air > 304.7 Combination Indoor and Outdoor Combustion Air