// CODE SNIPPET
40.4.5 Open Flames and Sparks
JUMP TO FULL CODE CHAPTER
Cutting and welding shall comply with the applicable requirements of NFPA 51B, Standard for Fire Prevention During Welding, Cutting, and Other Hot Work. [654:9.5.1]
Grinding, chipping, and other operations that produce either sparks or open-flame ignition sources shall be controlled by a hot work permit system in accordance with NFPA 51B. [654:9.5.2]
Smoking shall be permitted only in designated areas. [654:9.5.3]
Related Code Sections
40.4.5 Dust Explosion and Fire Prevention, Open Flames and Sparks
] Grinding, chipping, and other operations that produce either sparks or open-flame ignition sources shall be controlled by a hot work permit ...
Fire Code 2015 of Delaware > 40 Dust Explosion and Fire Prevention > 40.4 Ignition Sources > 40.4.5 Open Flames and Sparks
31.3.2.1.12 Forest Products,
Cutting, welding, or other use of open flames or spark-producing equipment shall not be permitted in the storage area unless by an approved permit ...
Fire Code 2015 of Delaware > 31 Forest Products > 31.3 Protection of Storage of Forest Products > 31.3.2 General Fire Protection > 31.3.2.1 Operational Fire Prevention > 31.3.2.1.12
31.3.2.1.12 Forest Products and Biomass Feedstocks,
Cutting, welding, or other use of open flames or
spark-producing equipment shall not be permitted in the storage area unless by an approved permit ...
Fire Code 2021 of Delaware > 31 Forest Products and Biomass Feedstocks > 31.3 Protection of Storage of Forest Products > 31.3.2 General Fire Protection > 31.3.2.1 Operational Fire Prevention > 31.3.2.1.12
43.5.1.1.1 Spraying, Dipping, and Coating Using Flammable or Combustible Materials,
There shall be no open flames or spark-producing equipment within 20 ft (6100 mm) of the spray operation while the spray operation is being conducted ...
Fire Code 2015 of Delaware > 43 Spraying, Dipping, and Coating Using Flammable or Combustible Materials > 43.5 Miscellaneous Spray Operations > 43.5.1 Vehicle Undercoating and Body Lining > 43.5.1.1 > 43.5.1.1.1
43.5.1.1.1 Spraying, Dipping, and Coating Using Flammable or Combustible Materials,
There shall be no open flames or spark-producing
equipment within 20 ft (6100 mm) of the spray operation while
the spray operation is being conducted ...
Fire Code 2021 of Delaware > 43 Spraying, Dipping, and Coating Using Flammable or Combustible Materials > 43.5 Miscellaneous Spray Operations > 43.5.1 Vehicle Undercoating and Body Lining > 43.5.1.1 > 43.5.1.1.1