// CODE SNIPPET
1910.106(h)(3)(iv)(a) Open Air Construction
Related Code Sections
1910.106(h)(3)(iv)(a) Hazardous Materials, Open Air Construction
OSHA 1910 General Industry > H Hazardous Materials > 1910.106 Flammable Liquids > 1910.106(h) Processing Plants > 1910.106(h)(3) Processing Building > 1910.106(h)(3)(iv) Explosion Relief > 1910.106(h)(3)(iv)(a) Open Air Construction
1910.169 Compressed Gas and Compressed Air Equipment, Air Receivers
of accumulated oil and water. Adequate automatic traps may be installed in addition to drain valves. The drain valve on the air receiver shall be opened ...
1910.253(g)(1) Welding, Cutting, and Brazing, Packaging
or equivalent. These packages shall be constructed water- and air-tight. Solder shall not be used in such a manner that the package would fail if exposed ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.253 Oxygen-Fuel Gas Welding and Cutting > 1910.253(g) Calcium Carbide Storage > 1910.253(g)(1) Packaging
1910.110(f)(5) Hazardous Materials, Storage Within Special Buildings or Rooms
shall not be below ground level. Any space below the floor shall be of solid fill or properly ventilated to the open air ...
OSHA 1910 General Industry > H Hazardous Materials > 1910.110 Storage and Handling of Liquefied Petroleum Gases > 1910.110(f) Storage of Containers Awaiting Use or Resale > 1910.110(f)(5) Storage Within Special Buildings or Rooms
1910.94(c)(3) Occupational Health and Environmental Control, Design and Construction of Spray Booths
Spray booths shall be designed and constructed in accordance with ยง 1910.107(b)(1) through (b)(4) and (b)(6) through (b)(10). for a more detailed ...
OSHA 1910 General Industry > G Occupational Health and Environmental Control > 1910.94 Ventilation > 1910.94(c) Spray Finishing Operations > 1910.94(c)(3) Design and Construction of Spray Booths