// CODE SNIPPET
402.8.2.2 OLF Range
JUMP TO FULL CODE CHAPTER
The occupant load factor (OLF) is not required to be less than 30 and shall not exceed 50.
Related Code Sections
402.8.2.2 Special Detailed Requirements Based on Occupancy and Use, OLF Range
The occupant load factor ( OLF ) is not required to be less than 30 and shall not exceed 50 ...
Building Code 2018 of Utah > 4 Special Detailed Requirements Based on Occupancy and Use > 402 Covered Mall and Open Mall Buildings > 402.8 Means of Egress > 402.8.2 Determination of Occupant Load > 402.8.2.2 OLF Range
402.8.2.2 Special Detailed Requirements Based on Use and Occupancy, OLF Range
The occupant load factor ( OLF ) is not required to be less than 30 and shall not exceed 50 ...
Building Code 2015 of Utah > 4 Special Detailed Requirements Based on Use and Occupancy > 402 Covered Mall and Open Mall Buildings > 402.8 Means of Egress > 402.8.2 Determination of Occupant Load > 402.8.2.2 OLF Range
(C) Wiring and Protection, Range Loads
It shall be permissible to apply demand factors for range loads in accordance with Table 220.55, including Note 4 ...
National Electrical Code 2017 of Utah > 2 Wiring and Protection > 220 Branch-Circuit, Feeder, and Service Load Calculations > 220.18 Maximum Loads > (C) Range Loads
(4) Equipment for General Use, Range Hoods
Range hoods shall be permitted to be cord-and-plug-connected with a flexible cord identified as suitable for use on range hoods in the installation ...
National Electrical Code 2017 of Utah > 4 Equipment for General Use > 422 Appliances > 422.16 Flexible Cords > (B) Specific Appliances > (4) Range Hoods