// CODE SNIPPET
1926.350(i) Oil and Grease Hazards
JUMP TO FULL CODE CHAPTER
Oxygen cylinders and fittings shall be kept away from oil or grease. Cylinders, cylinder caps and valves, couplings, regulators, hose, and apparatus shall be kept free from oil or greasy substances and shall not be handled with oily hands or gloves. Oxygen shall not be directed at oily surfaces, greasy clothes, or within a fuel oil or other storage tank or vessel.
Related Code Sections
1926.350(i) Welding and Cutting, Oil and Grease Hazards
Oxygen cylinders and fittings shall be kept away from oil or grease. Cylinders, cylinder caps and valves, couplings, regulators, hose, and apparatus ...
OSHA 1926 Construction > J Welding and Cutting > 1926.350 Gas Welding and Cutting > 1926.350(i) Oil and Grease Hazards
1926.1053(b)(2) Stairways and Ladders,
Ladders shall be maintained free of oil, grease, and other slipping hazards ...
OSHA 1926 Construction > X Stairways and Ladders > 1926.1053 Ladders > 1926.1053(b) Use > 1926.1053(b)(2)
1926.307(p)(2) Tools - Hand and Power, Shafting
Shafting shall be kept in alignment, free from rust and excess oil or grease ...
OSHA 1926 Construction > I Tools - Hand and Power > 1926.307 Mechanical Power-Transmission Apparatus > 1926.307(p) Care of Equipment > 1926.307(p)(2) Shafting
1926.800(m)(9) Underground Construction, Caissons, Cofferdams, and Compressed Air,
Electrical installations in underground areas where oil, grease, or diesel fuel are stored shall be used only for lighting fixtures ...
OSHA 1926 Construction > S Underground Construction, Caissons, Cofferdams, and Compressed Air > 1926.800 Underground Construction > 1926.800(m) Fire Prevention and Control > 1926.800(m)(9)
1926.405(j)(5)(iv) Electrical, Oil-Insulated Transformers
If they present a fire hazard to employees, oil-insulated transformers installed indoors shall be in a vault ...
OSHA 1926 Construction > K Electrical > 1926.405 Wiring Methods, Components, and Equipment for General Use > 1926.405(j) Equipment for General Use > 1926.405(j)(5) Transformers > 1926.405(j)(5)(iv) Oil-Insulated Transformers