// CODE SNIPPET
Section 806 Offset Ledges
JUMP TO FULL CODE CHAPTER
Offset ledges shall be not greater than 8 inches (203 mm) in width.
Where an offset ledge is located less than 42 inches (1067 mm) below the design waterline, the width of such ledge shall be proportionately less than 8 inches (203 mm) in width so as to fall within 11 degrees of vertical as measured from the top of the design waterline.
Related Code Sections
Section 806 Permanent Inground Residential Swimming Pools, Offset Ledges
Offset ledges shall be not greater than 8 inches (203 mm) in width ...
Swimming Pool and Spa Code 2015 of Washington > 8 Permanent Inground Residential Swimming Pools > 806 Offset Ledges
Section 806 Permanent Inground Residential Swimming Pools, Offset Ledges
Offset ledges shall be not greater than 8 inches (203 mm) in width ...
Swimming Pool and Spa Code 2018 of Washington > 8 Permanent Inground Residential Swimming Pools > 806 Offset Ledges
Section 404 Public Swimming Pools, Rest Ledges
Rest ledges along the pool walls are permitted. They shall be not less than 4 feet (1220 mm) below the water surface. Where a ledge is provided ...
Section 404 Public Swimming Pools, Rest Ledges
Rest ledges along the pool walls are permitted. They shall be not less than 4 feet (1220 mm) below the water surface. Where a ledge is provided ...
404.1 Public Swimming Pools, Rest Ledges
Rest ledges along the pool walls are permitted. They shall be not less than 4 feet (1220 mm) below the water surface. Where a ledge is provided ...
Swimming Pool and Spa Code 2015 of Washington > 4 Public Swimming Pools > 404 Rest Ledges > 404.1 Rest Ledges