// CODE SNIPPET
1703.6 Off-Site Fabrication
JUMP TO FULL CODE CHAPTER
Where structural components or other items regulated by this code are not visible for inspection after completion of a prefabricated assembly, the owner shall maintain a report of each prefabricated assembly. The report shall indicate the complete details of the assembly, including a description of the assembly and its components, the basis upon which the assembly is being evaluated, test results and similar information and other data as necessary for the building official to confirm conformance to this code.
Related Code Sections
1703.6 Special Inspections and Tests, Off-Site Fabrication
The owner shall provide for special inspections of fabricated items in accordance with Section 1704.2.5 ...
2019 Chicago Building Code > 17 Special Inspections and Tests > 1703 Products, Materials and Assemblies > 1703.6 Off-Site Fabrication
3324.5 Work Site Safety and Operations, Dust Control
The general contractor shall employ adequate wetting or other abatement measures to prevent the off-site dispersion of dust and debris from the work ...
2019 Chicago Building Code > 33 Work Site Safety and Operations > 3324 Construction Site Cleanliness > 3324.5 Dust Control
803.10 Interior Finishes, Site-Fabricated Stretch Systems
Where used as interior wall or interior ceiling finish materials, site-fabricated stretch systems containing all three components described ...
2019 Chicago Building Code > 8 Interior Finishes > 803 Wall and Ceiling Finishes > 803.10 Site-Fabricated Stretch Systems
18.104.22.168* System Components and Hardware, Fabrication
When welding sprinkler pipe, the pipe shall be shop welded unless the requirements of 22.214.171.124 or 126.96.36.199 are met ...
Standard for the Installation of Sprinkler Systems 2016 of Chicago, IL > 6 System Components and Hardware > 6.5 Joining of Pipe and Fittings > 6.5.2 Welded Pipe and Fittings > 188.8.131.52* Fabrication