// CODE SNIPPET
§27-935 Number of Standpipe Risers Required
JUMP TO FULL CODE CHAPTER
The number of standpipe risers shall be such that every point of every floor can be reached by a twenty foot stream from a nozzle attached to not more than one hundred twenty-five feet of hose connected to a riser outlet valve.
Related Code Sections
§27-935 Fire Alarm, Detection and Extinguishing Equipment, Number of Standpipe Risers Required
The number of standpipe risers shall be such that every point of every floor can be reached by a twenty foot stream from a nozzle attached ...
NYC 1968 Code (Vol I) > 17 Fire Alarm, Detection and Extinguishing Equipment > 3 Standpipe Requirements > §27-935 Number of Standpipe Risers Required
Article 17 Standpipe Systems [PDF] (page 3)
before such test is to be made. Sub-Article 2. Standpipe Risers (16.2.1). §C26-1386.0 Number and Location of Standpipe Risers.a. The number and location ...
Article 17 Standpipe Systems [PDF] (page 2)
and number of each riser, valve, pump, tank and Siamese hose connection in the system and such other information as may be required at any time ...
Article 17 Standpipe Systems [PDF] (page 6)
marked with the number assigned to it on the diagram required by subdivision c. of section C261384.0. This marking shall be in white figures two inches ...
Article 17 Standpipe Systems [PDF] (page 5)
). §C26-1392.0 Supports of Standpipe Risers and Piping.-Piping in standpipe systems shall be securely and rigidly supported risers shall be supported ...