// CODE SNIPPET
(A) Number of Branch Circuits
JUMP TO FULL CODE CHAPTER
The minimum number of branch circuits shall be determined from the total calculated load and the size or rating of the circuits used. In all installations, the number of circuits shall be sufficient to supply the load served. In no case shall the load on any circuit exceed the maximum specified by 220.18.
Related Code Sections
(A) Wiring and Protection, Number of Branch Circuits
The minimum number of branch circuits shall be determined from the total calculated load and the size or rating of the circuits used. In all ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 210 Branch Circuits > 210.11 Branch Circuits Required > (A) Number of Branch Circuits
(A) Special Occupancies, Lighting
The number of branch circuits shall be based on 33 volt-amperes/m 2 (3 VA/ft 2 ) times outside dimensions of the mobile home (coupler excluded ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 550 Mobile Homes, Manufactured Homes, and Mobile Home Parks > 550.12 Branch Circuits > (A) Lighting
(3) Wiring and Protection, Bathroom Branch Circuits
In addition to the number of branch circuits required by other parts of this section, one or more 120-volt, 20-ampere branch circuit shall ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 210 Branch Circuits > 210.11 Branch Circuits Required > (C) Dwelling Units > (3) Bathroom Branch Circuits