// CODE SNIPPET
(A) Not Smaller Than the Neutral Conductor
Related Code Sections
(A) Wiring and Protection, Not Smaller Than the Neutral Conductor
electrode conductor shall not be smaller than the neutral conductor and not smaller than 8 AWG copper or 6 AWG aluminum ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 250 Grounding and Bonding > 250.166 Size of the Direct-Current Grounding Electrode Conductor > (A) Not Smaller Than the Neutral Conductor
(C) Special Conditions, Neutral Conductors
to which a single-phase line-to-neutral power source is connected shall not be smaller than the ampacity in 705.28(B ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 705 Interconnected Electric Power Production Sources > 705.28 Circuit Sizing and Current > (C) Neutral Conductors
(E) Equipment for General Use, Grounded Neutral Conductor
The grounded neutral conductor shall be as follows: Connected to the pressure vessel containing the electrodes Insulated for not less than 1000 ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 490 Equipment Over 1000 Volts, Nominal > 490.72 Branch-Circuit Requirements > (E) Grounded Neutral Conductor
200.4 Wiring and Protection, Neutral Conductors
). Neutral conductors shall not be used for more than one branch circuit, for more than one multiwire branch circuit ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 200 Use and Identification of Grounded Conductors > 200.4 Neutral Conductors
445.13 Equipment for General Use, Ampacity of Conductors
with 220.61. Conductors that must carry ground-fault currents shall not be smaller than required by 250.30(A). Neutral conductors of dc generators that must ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 445 Generators > 445.13 Ampacity of Conductors