// CODE SNIPPET
(1) Not Fastened in Place
Related Code Sections
(1) Special Equipment, Not Fastened in Place
Where the electric vehicle supply equipment or charging system is not fastened in place, the cord-exposed usable length shall be measured from ...
National Electrical Code 2017 of New York State > 6 Special Equipment > 625 Electric Vehicle Charging System > 625.17 Cords and Cables > (C) Overall Cord and Cable Length > (1) Not Fastened in Place
(1) Wiring and Protection, Cord-And-Plug-Connected Equipment Not Fastened in Place
The rating of any one cord-and-plug-connected utilization equipment not fastened in place shall not exceed 80 percent of the branch-circuit ampere ...
National Electrical Code 2017 of New York State > 2 Wiring and Protection > 210 Branch Circuits > 210.23 Permissible Loads, Multiple-Outlet Branch Circuits > (A) 15- And 20-Ampere Branch Circuits > (1) Cord-And-Plug-Connected Equipment Not Fastened in Place
504.6 Water Heaters, Requirements for Discharge Piping
fittings. The outlet end of such tubing shall be fastened in place ...
2020 Plumbing Code of NYS > 5 Water Heaters > 504 Safety Devices > 504.6 Requirements for Discharge Piping
P2804.6.1 Water Heaters, Requirements for Discharge Pipe
end of such tubing shall be fastened in place ...
2020 Residential Code of New York State > 28 Water Heaters > P2804 Relief Valves > P2804.6 Installation of Relief Valves > P2804.6.1 Requirements for Discharge Pipe