// CODE SNIPPET
10.8.2.4 Normal Condition Detection
Related Code Sections
10.8.2.4 Fundamentals, Normal Condition Detection
Where required by this Code, the system shall generate a restoration signal when the device or signaling system returns to normal ...
National Fire Alarm and Signaling Code 2019 of Maine > 10 Fundamentals > 10.8 Detection and Signaling of Conditions > 10.8.2 Alarm Condition Detection > 10.8.2.4 Normal Condition Detection
3.3.263* Definitions, Signal
the manual or automatic detection of a fire alarm condition. (SIG-FUN ...
National Fire Alarm and Signaling Code 2019 of Maine > 3 Definitions > 3.3 General Definitions > 3.3.263* Signal
29.10.2* Single- And Multiple-Station Alarms and Household Signaling Systems,
signature, shall operate in the normal environmental conditions, and shall be in compliance with applicable standards such as ANSI/UL 268, Standard ...
National Fire Alarm and Signaling Code 2019 of Maine > 29 Single- And Multiple-Station Alarms and Household Signaling Systems > 29.10 Equipment Performance > 29.10.2*
412.3.7 Special Detailed Requirements Based on Use and Occupancy, Elevator Protection
Wires or cables that provide normal or standby power, control signals, communication with the car, lighting, heating, air conditioning, ventilation ...
Commercial Building Code of the MUBEC and MUBC > 4 Special Detailed Requirements Based on Use and Occupancy > 412 Aircraft-Related Occupancies > 412.3 Airport Traffic Control Towers > 412.3.7 Elevator Protection
907.2.6.3.3 Fire Protection Systems, Automatic Smoke Detection System
activity spaces and other common spaces normally accessible to residents. Exceptions: Other approved smoke detection arrangements ...
Commercial Building Code of the MUBEC and MUBC > 9 Fire Protection Systems > 907 Fire Alarm and Detection Systems > 907.2 Where Required—New Buildings and Structures > 907.2.6 Group I > 907.2.6.3 Group I-3 Occupancies > 907.2.6.3.3 Automatic Smoke Detection System