// CODE SNIPPET
602.1.2.3 Nonrenewable Energy
JUMP TO FULL CODE CHAPTER
In calculating the annual energy use index for fuel other than electrical power, energy use shall be converted to consistent units by multiplying the nonrenewable energy fossil fuel use at the utility meter or measured point of delivery to Btu's and multiplying by the conversion factor in Table 602.1.2.2. The conversion factor for energy sources not included in Table 602.1.2.2 shall be 1.1. Conversion factors for purchased district heating shall be 1.35 for hot water and 1.45 for steam. The conversion factor for district cooling shall be 0.33 times the value in Table 602.1.2.1 based on the EPA eGRID Sub-region in which the building is located.
Related Code Sections
602.1.2.3 ENERGY CONSERVATION, EFFICIENCY AND CO2e EMISSION REDUCTION, Nonrenewable Energy
the nonrenewable energy fossil fuel use at the utility meter or measured point of delivery to Btu's and multiplying by the conversion factor in Table ...
Green Construction Code 2012 of Maryland > 6 ENERGY CONSERVATION, EFFICIENCY AND CO2e EMISSION REDUCTION > 602 Modeled Performance Pathway Requirements > 602.1 Performance-Based Compliance > 602.1.2 Base Annual Energy Use Index > 602.1.2.3 Nonrenewable Energy
101.4.6 Scope and Administration, Energy
The provisions of the International Energy Conservation Code shall apply to all matters governing the design and construction of buildings ...
Building Code 2015 of Maryland > 1 Scope and Administration > 101 General > 101.4 Referenced Codes > 101.4.6 Energy
101.4.6 Scope and Administration, Energy
The provisions of the International Energy Conservation Code shall apply to all matters governing the design and construction of buildings ...
Building Code 2018 of Maryland > 1 Scope and Administration > 101 General > 101.4 Referenced Codes > 101.4.6 Energy
Section 1106 Additions, Energy Conservation
Additions to existing buildings shall conform to the energy requirements of the International Energy Conservation Code or International ...
Chapter 13 Energy Efficiency
User notes:
About this chapter: The purpose of Chapter 13 is to provide minimum design requirements that will promote efficient energy ...