// CODE SNIPPET
1207.2.2 Noncondensing Boilers
JUMP TO FULL CODE CHAPTER
Where the heat exchanger and venting system are not designed to operate with condensed flue gases, the boiler shall be permitted to connect directly to the panel heating system where protected from flue gas condensation. The operating temperature of the boiler shall be more than the fluid temperature in accordance with the manufacturer's instructions.
Related Code Sections
1207.2.2 Hydronics, Noncondensing Boilers
Where the heat exchanger and venting system are not designed to operate with condensed flue gases, the boiler shall be permitted to connect directly ...
Uniform Mechanical Code 2018 of Nevada > 12 Hydronics > 1207.0 Heating Appliances and Equipment > 1207.2 Boilers > 1207.2.2 Noncondensing Boilers
Section M2001 Boilers and Water Heaters, Boilers
In addition to the requirements of this code, the installation of boilers shall conform to the manufacturer's instructions. The manufacturer's rating ...
Section M2001 Boilers and Water Heaters, Boilers
In addition to the requirements of this code, the installation of boilers shall conform to the manufacturer's instructions. The manufacturer's rating ...
1002.3 Boilers and Pressure Vessels, Electric Boilers
Electric boilers shall be listed and labeled in accordance with UL 834 ...
Uniform Mechanical Code 2018 of Nevada > 10 Boilers and Pressure Vessels > 1002.0 Standards > 1002.3 Electric Boilers
1003.2.1 Boilers and Pressure Vessels, Automatic Boilers
Automatic boilers shall be equipped with controls and limit devices in accordance with ASME CSD-1 or Table 1003.2.1.
The Authority Having ...
Uniform Mechanical Code 2018 of Nevada > 10 Boilers and Pressure Vessels > 1003.0 Detailed Requirements > 1003.2 Controls > 1003.2.1 Automatic Boilers