// CODE SNIPPET
507.4.2 Noncanopy Size and Location
Related Code Sections
507.4.2 Exhaust Systems, Noncanopy Size and Location
Noncanopy-type hoods shall be located not greater than 3 feet (914 mm) above the cooking surface. The edge of the hood shall be set back not greater ...
Mechanical Code 2018 of Maryland > 5 Exhaust Systems > 507 Commercial Kitchen Hoods > 507.4 Hood Size and Location > 507.4.2 Noncanopy Size and Location
308.7.1 General Regulations, Location
For pipe sizes greater than 4 inches (102 mm), restraints shall be provided for drain pipes at all changes in direction and at all changes ...
Plumbing Code 2018 of Maryland > 3 General Regulations > 308 Piping Support > 308.7 Anchorage > 308.7.1 Location
708.1.5 Sanitary Drainage, Cleanout Size
that is one size larger than the P-trap size. Cleanouts located on stacks can be one size smaller than the stack size. The size of cleanouts for cast ...
Plumbing Code 2018 of Maryland > 7 Sanitary Drainage > 708 Cleanouts > 708.1 Cleanouts Required > 708.1.5 Cleanout Size
716.2.5.1 Fire and Smoke Protection Features, Size Limitations
located in fire walls and in fire barriers in accordance with Table 716.1(2) to the maximum size tested and in accordance with their listings ...
Building Code 2018 of Maryland > 7 Fire and Smoke Protection Features > 716 Opening Protectives > 716.2 Fire Door Assemblies > 716.2.5 Glazing in Fire Door Assemblies > 716.2.5.1 Size Limitations