// CODE SNIPPET
1926.961(b)(2) No System Operator
JUMP TO FULL CODE CHAPTER
If no system operator is in charge of the lines or equipment and their means of disconnection, the employer shall designate one employee in the crew to be in charge of the clearance and to perform the functions that the system operator would otherwise perform under this section. All of the requirements of paragraph (c) of this section apply, in the order specified, except as provided in paragraph (b)(3) of this section.
Related Code Sections
1926.961(b)(2) Electric Power Transmission and Distribution, No System Operator
If no system operator is in charge of the lines or equipment and their means of disconnection, the employer shall designate one employee in the crew ...
OSHA 1926 Construction > V Electric Power Transmission and Distribution > 1926.961 Deenergizing Lines and Equipment for Employee Protection > 1926.961(b) General > 1926.961(b)(2) No System Operator
1926.702(a)(2) Concrete and Masonry Construction,
No employee shall be permitted to enter storage facilities unless the ejection system has been shut down, locked out, and tagged to indicate ...
OSHA 1926 Construction > Q Concrete and Masonry Construction > 1926.702 Requirements for Equipment and Tools > 1926.702(a) Bulk Cement Storage > 1926.702(a)(2)
1926.1423(j) Cranes & Derricks in Construction, Anchoring to the Load Line
No load is suspended from the load line when the personal fall arrest system is anchored to the crane/derrick's hook (or other part ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1423 Fall Protection > 1926.1423(j) Anchoring to the Load Line
1926.552(b)(1)(i) Helicopters, Hoists, Elevators, and Conveyors,
Operating rules shall be established and posted at the operator's station of the hoist. Such rules shall include signal system and allowable line ...
OSHA 1926 Construction > N Helicopters, Hoists, Elevators, and Conveyors > 1926.552 Material Hoists, Personnel Hoists, and Elevators > 1926.552(b) Material Hoists > 1926.552(b)(1)(i)
1926.502(h) Fall Protection, Safety Monitoring Systems
Safety monitoring systems [See 1926.501(b)(10) and 1926.502(k)] and their use shall comply with the following provisions ...
OSHA 1926 Construction > M Fall Protection > 1926.502 Fall Protection Systems Criteria and Practices > 1926.502(h) Safety Monitoring Systems