// CODE SNIPPET
(A) No Reduction in Current Rating
Related Code Sections
(A) Special Occupancies, No Reduction in Current Rating
Each receptacle and its corresponding cable shall have the same current and voltage rating as the plug supplying it. It shall not be utilized ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 520 Theaters, Audience Areas of Motion Picture and Television Studios, Performance Areas, and Similar Locations > 520.69 Adapters > (A) No Reduction in Current Rating
240.87 Wiring and Protection, Arc Energy Reduction
Where the highest continuous current trip setting for which the actual overcurrent device installed in a circuit breaker is rated or can be adjusted ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 240 Overcurrent Protection > 240.87 Arc Energy Reduction
440.6 Equipment for General Use, Ampacity and Rating
be used. Exception No. 1: Where so marked, the branch-circuit selection current shall be used instead of the rated-load current to determine ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 440 Air-Conditioning and Refrigerating Equipment > 440.6 Ampacity and Rating
(C) Equipment for General Use, Rating or Setting
the rating specified in Table 430.52, or the rating modified by Exception No. 1, is not sufficient for the starting current of the motor: The ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 430 Motors, Motor Circuits, and Controllers > 430.52 Rating or Setting for Individual Motor Circuit > (C) Rating or Setting
620.13 Special Equipment, Feeder and Branch-Circuit Conductors
on the nameplate current rating of the driving motor of the motor-generator set that supplies power to the elevator motor. Informational Note No. 1: The ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 620 Elevators, Dumbwaiters, Escalators, Moving Walks, Platform Lifts, and Stairway Chairlifts > 620.13 Feeder and Branch-Circuit Conductors