// CODE SNIPPET
(D) No Energized Parts
Related Code Sections
(D) Wiring and Protection, No Energized Parts
Plug fuses, fuseholders, and adapters shall have no exposed energized parts after fuses or fuses and adapters have been installed ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 240 Overcurrent Protection > 240.50 General > (D) No Energized Parts
(A) Equipment for General Use, General
to persons who may be working in the area of the energized parts. Exception No. 2: The motor control circuit disconnecting means shall be permitted ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 430 Motors, Motor Circuits, and Controllers > 430.75 Disconnection > (A) General
(A) Wiring and Protection, Equipment Grounding
the equipment is energized, the metal parts shall not be required to be grounded. Informational Note: See 250.110, Exception No. 2, for pole ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 250 Grounding and Bonding > 250.190 Grounding of Equipment > (A) Equipment Grounding
450.1 Equipment for General Use, Scope
that constitute a component part of other apparatus and comply with the requirements for such apparatus. Exception No. 3: Transformers that are an integral ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 450 Transformers and Transformer Vaults (Including Secondary Ties) > 450.1 Scope
110.56 General, Energized Parts
Bare terminals of transformers, switches, motor controllers, and other equipment shall be enclosed to prevent accidental contact with energized parts ...
National Electrical Code 2020 of Minnesota > 1 General > 110 Requirements for Electrical Installations > 110.56 Energized Parts