// CODE SNIPPET
1926.1425(e)(1) No Employee Must Be Directly Under the Load
Related Code Sections
1926.1425(e)(1) Cranes & Derricks in Construction, No Employee Must Be Directly Under the Load
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1425 Keeping Clear of the Load > 1926.1425(e) During a Tilt-Up or Tilt-Down Operation: > 1926.1425(e)(1) No Employee Must Be Directly Under the Load
1926.701(e) Concrete and Masonry Construction, Working Under Loads
No employee shall be permitted to work under concrete buckets while buckets are being elevated or lowered into position ...
OSHA 1926 Construction > Q Concrete and Masonry Construction > 1926.701 General Requirements > 1926.701(e) Working Under Loads
1926.753(d) Steel Erection, Working Under Loads
Routes for suspended loads shall be pre-planned to ensure that no employee is required to work directly below a suspended load except ...
OSHA 1926 Construction > R Steel Erection > 1926.753 Hoisting and Rigging > 1926.753(d) Working Under Loads
1926.1431(k)(11) Cranes & Derricks in Construction, Other Load Lines
No lifts must be made on any other of the equipment's load lines while personnel are being hoisted, except in pile driving operations ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1431 Hoisting Personnel > 1926.1431(k) Work Practices > 1926.1431(k)(11) Other Load Lines
1926.1411(b)(4) Cranes & Derricks in Construction, Dedicated Spotter
If any part of the equipment while traveling will get closer than 20 feet to the power line, the employer must ensure that a dedicated spotter who ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1411 Power Line Safety-While Traveling Under or Near Power Lines With No Load > 1926.1411(b) The Employer Must Ensure That: > 1926.1411(b)(4) Dedicated Spotter