// CODE SNIPPET
R602.12.6 Narrow Panels
JUMP TO FULL CODE CHAPTER
The bracing methods referenced in Section R602.10 and specified in Sections R602.12.6.1 through R602.12.6.3 shall be permitted where using simplified wall bracing.
Braced wall panels constructed as Method CS-G in accordance with Tables R602.10.4 and R602.10.5 shall be permitted for one-story garages where all framed portions of all exterior walls are sheathed with wood structural panels. Each CS-G panel shall be equivalent to 0.5 of a bracing unit. Segments of wall that include a Method CS-G panel shall meet the requirements of Section R602.10.4.2.
Braced wall panels constructed as Method CS-PF in accordance with Section R602.10.6.4 shall be permitted where all framed portions of all exterior walls are sheathed with wood structural panels. Each CS-PF panel shall equal 0.75 bracing units. Not more than four CS-PF panels shall be permitted on all segments of walls parallel to each side of the circumscribed rectangle. Segments of wall that include a Method CS-PF panel shall meet the requirements of Section R602.10.4.2.
Braced wall panels constructed as Method ABW, PFH and PFG shall be permitted where bracing units are constructed using wood structural panels applied either continuously or intermittently. Each ABW and PFH panel shall equal one bracing unit and each PFG panel shall be equal to 0.75 bracing unit.
Related Code Sections
R602.12.6 Wall Construction, Narrow Panels
wall bracing. Braced wall panels constructed ...
Residential Code 2018 of Kansas > 6 Wall Construction > R602 Wood Wall Framing > R602.12 Simplified Wall Bracing > R602.12.6 Narrow Panels
2.11.11.5 Electric Elevators, Panels
Panels shall conform to 2.11.11.5.1 through 2.11.11.5.8 ...
Safety Code for Elevators and Escalators 2016 of Kansas > 2 Electric Elevators > 2.11 Protection of Hoistway Openings > 2.11.11 Entrances, Horizontal Slide Type > 2.11.11.5 Panels
2.11.13.3 Electric Elevators, Panels
Panels shall conform to 2.11.13.3.1 through 2.11.13.3.7 ...
Safety Code for Elevators and Escalators 2016 of Kansas > 2 Electric Elevators > 2.11 Protection of Hoistway Openings > 2.11.13 Entrances, Swinging Type > 2.11.13.3 Panels
408.50 Equipment for General Use, Panels
The panels of switchboards and switchgear shall be made of moisture-resistant, noncombustible material ...
National Electrical Code 2017 of Kansas > 4 Equipment for General Use > 408 Switchboards, Switchgear, and Panelboards > 408.50 Panels
7.2.2.2.2 Means of Egress, Curved Stairs
) at a point 12 in. (305 mm) from the narrower end of the tread and the smallest radius is not less than twice the stair width ...
Life Safety Code 2018 of Kansas > 7 Means of Egress > 7.2 Means of Egress Components > 7.2.2 Stairs > 7.2.2.2 Dimensional Criteria > 7.2.2.2.2 Curved Stairs