// CODE SNIPPET
(2) Nameplate Values
Related Code Sections
(2) Equipment for General Use, Nameplate Values
Separate motor overload protection shall be based on the motor nameplate current rating ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 430 Motors, Motor Circuits, and Controllers > 430.6 Ampacity and Motor Rating Determination > (A) General Motor Applications > (2) Nameplate Values
(A) Equipment for General Use, Nameplate Horsepower Markings
nameplate. Where an appliance consists of multiple motors, or one or more motors and other loads, the nameplate value shall not be less than the equivalent ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 422 Appliances > 422.62 Appliances Consisting of Motors and Other Loads > (A) Nameplate Horsepower Markings
(A) Special Equipment, Conductors Supplying Single Motor
). Informational Note: Some elevator motor currents, or those motor currents of similar function, exceed the motor nameplate value. Heating ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 620 Elevators, Dumbwaiters, Escalators, Moving Walks, Platform Lifts, and Stairway Chairlifts > 620.13 Feeder and Branch-Circuit Conductors > (A) Conductors Supplying Single Motor
(C) Wiring and Protection, Heating and Air-Conditioning Load
of the nameplate ratings of electric thermal storage and other heating systems where the usual load is expected to be continuous at the full nameplate value. Systems ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 220 Branch-Circuit, Feeder, and Service Load Calculations > 220.82 Dwelling Unit > (C) Heating and Air-Conditioning Load
909.18.8.3 Fire Protection and Life Safety Systems, Reports
, nameplate data, design values, measured values and identification tag or mark . The report shall be reviewed by the responsible registered design ...
2020 Minnesota Building Code > 9 Fire Protection and Life Safety Systems > 909 Smoke Control Systems > 909.18 Acceptance Testing > 909.18.8 Testing for Smoke Control > 909.18.8.3 Reports