// CODE SNIPPET
1926.753(e) Multiple Lift Rigging Procedure
JUMP TO FULL CODE CHAPTER
A multiple lift shall only be performed if the following criteria are met:
Only beams and similar structural members are lifted; and
All employees engaged in the multiple lift have been trained in these procedures in accordance with § 1926.761(c)(1).
No crane is permitted to be used for a multiple lift where such use is contrary to the manufacturer's specifications and limitations.
A maximum of five members are hoisted per lift;
Components of the multiple lift rigging assembly shall be specifically designed and assembled with a maximum capacity for total assembly and for each individual attachment point. This capacity, certified by the manufacturer or a qualified rigger, shall be based on the manufacturer's specifications with a 5 to 1 safety factor for all components.
The rigging capacity specified in the rigging rating chart.
Attached at their center of gravity and maintained reasonably level;