// CODE SNIPPET
625.47 Multiple Feeder or Branch Circuits
JUMP TO FULL CODE CHAPTER
Where equipment is identified for the application, more than one feeder or branch circuit shall be permitted to supply equipment.
Related Code Sections
625.47 Special Equipment, Multiple Feeder or Branch Circuits
Where equipment is identified for the application, more than one feeder or branch circuit shall be permitted to supply equipment ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 625 Electric Vehicle Power Transfer System > 625.47 Multiple Feeder or Branch Circuits
(2) Special Occupancies, Outdoor Branch Circuits and Feeders
Multiple feeders and branch circuits shall be permitted and clearances for overhead branch-circuit and feeder wiring in locations of the boatyard ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 555 Marinas, Boatyards, Floating Buildings, and Commercial and Noncommercial Docking Facilities > 555.34 Wiring Methods and Installation > (B) Installation > (2) Outdoor Branch Circuits and Feeders
225.30 Wiring and Protection, Number of Supplies
By special permission, additional feeders or branch circuits shall be permitted for either of the following: Multiple ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 225 Outside Branch Circuits and Feeders > 225.30 Number of Supplies
(2) Equipment for General Use, Grounded Circuit Conductors
Where multiple branch or feeder grounded circuit conductor load terminals for field wiring are grouped together in one location, they shall be so ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 408 Switchboards, Switchgear, and Panelboards > 408.18 Clearances > (C) Connections > (2) Grounded Circuit Conductors
(1) Wiring and Protection, Conductor Installations in Raceways, Auxiliary Gutters, or Cable Trays
conductor shall be sized in accordance with 250.122, based on the overcurrent protective device for the feeder or branch circuit. (b) Multiple Raceways ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 250 Grounding and Bonding > 250.122 Size of Equipment Grounding Conductors > (F) Conductors in Parallel > (1) Conductor Installations in Raceways, Auxiliary Gutters, or Cable Trays