// CODE SNIPPET
1926.961(b)(4) Multiple Crews
JUMP TO FULL CODE CHAPTER
If two or more crews will be working on the same lines or equipment, then:
The crews shall coordinate their activities under this section with a single employee in charge of the clearance for all of the crews and follow the requirements of this section as if all of the employees formed a single crew, or
Each crew shall independently comply with this section and, if there is no system operator in charge of the lines or equipment, shall have separate tags and coordinate deenergizing and reenergizing the lines and equipment with the other crews.
Related Code Sections
1926.961(b)(4) Electric Power Transmission and Distribution, Multiple Crews
If two or more crews will be working on the same lines or equipment ...
OSHA 1926 Construction > V Electric Power Transmission and Distribution > 1926.961 Deenergizing Lines and Equipment for Employee Protection > 1926.961(b) General > 1926.961(b)(4) Multiple Crews
1926.1404(d) Cranes & Derricks in Construction, Crew Instructions
Before commencing assembly/disassembly operations, the A/D director must ensure that the crew members understand all of the following ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1404 Assembly/Disassembly--General Requirements (Applies to All Assembly and Disassembly Operations) > 1926.1404(d) Crew Instructions
1926.905(l) Blasting and the Use of Explosives,
When loading a long line of holes with more than one loading crew, the crews shall be separated by practical distance consistent with efficient ...
OSHA 1926 Construction > U Blasting and the Use of Explosives > 1926.905 Loading of Explosives or Blasting Agents > 1926.905(l)
1926.1404(e)(2) Cranes & Derricks in Construction,
Where the operator knows that a crew member went to a location covered by paragraph (e)(1) of this section, the operator must not move any part ...
OSHA 1926 Construction > CC Cranes & Derricks in Construction > 1926.1404 Assembly/Disassembly--General Requirements (Applies to All Assembly and Disassembly Operations) > 1926.1404(e) Protecting Assembly/Disassembly Crew Members Out of Operator View > 1926.1404(e)(2)
1926.961 Electric Power Transmission and Distribution, Deenergizing Lines and Equipment for Employee Protection
, the employer shall designate one employee in the crew to be in charge of the clearance and shall comply with all of the requirements of paragraph (c ...
OSHA 1926 Construction > V Electric Power Transmission and Distribution > 1926.961 Deenergizing Lines and Equipment for Employee Protection