// CODE SNIPPET
Section 307 Moved Structures [B]
JUMP TO FULL CODE CHAPTER
Structures moved into or within the jurisdiction shall comply with the provisions of the Building Code of New York State for new structures.
Related Code Sections
Section 307 Prescriptive Compliance Method, Moved Structures [B]
Structures moved into or within the jurisdiction shall comply with the provisions of the Building Code of New York State for new structures ...
(B) Wiring and Protection, Suddenly Moving Parts
Handles or levers of circuit breakers, and similar parts that may move suddenly in such a way that persons in the vicinity are likely to be injured ...
National Electrical Code 2017 of New York State > 2 Wiring and Protection > 240 Overcurrent Protection > 240.41 Arcing or Suddenly Moving Parts > (B) Suddenly Moving Parts
Section 409 Prescriptive Compliance Method, Moved Structures
Structures moved into or within the jurisdiction shall comply with the provisions of the International Building Code for new structures ...
Existing Building Code 2015 of New York State > 4 Prescriptive Compliance Method > 409 Moved Structures
Section 1302 Relocated or Moved Buildings, Requirements
Residential Code seismic provisions at the new location as applicable.
Exceptions:
Structures in Seismic Design Categories A and B and detached one ...
6.2.3.9 Escalators and Moving Walks, Supporting Structure
that it will not support combustion. (b) Roller-Bed Type. Where the treadway is supported on a series of rollers, the combination of roller spacing, belt ...
Safety Code for Elevators and Escalators 2013 of New York State > 6 Escalators and Moving Walks > 6.2 Moving Walks > 6.2.3 Construction Requirements > 6.2.3.9 Supporting Structure