// CODE SNIPPET
1910.303(f)(1) Motors and Appliances
JUMP TO FULL CODE CHAPTER
Each disconnecting means required by this subpart for motors and appliances shall be legibly marked to indicate its purpose, unless located and arranged so the purpose is evident.
Related Code Sections
1910.303(f)(1) Electrical, Motors and Appliances
Each disconnecting means required by this subpart for motors and appliances shall be legibly marked to indicate its purpose, unless located ...
OSHA 1910 General Industry > S Electrical > 1910.303 General > 1910.303(f) Disconnecting Means and Circuits > 1910.303(f)(1) Motors and Appliances
1910.304(g)(6)(vi)(C)(4) Electrical,
Motor-operated appliances of the following types: hedge clippers, lawn mowers, snow blowers, and wet scrubbers; ...
OSHA 1910 General Industry > S Electrical > 1910.304 Wiring Design and Protection > 1910.304(g) Grounding > 1910.304(g)(6) Supports, Enclosures, and Equipment to Be Grounded > 1910.304(g)(6)(vi) > 1910.304(g)(6)(vi)(C) If the Equipment Is of the Following Types: > 1910.304(g)(6)(vi)(C)(4)
1910.305(j)(3)(iii) Electrical,
the appliance is to be used on a specific frequency or frequencies, it shall be so marked. Where motor overload protection external to the appliance ...
OSHA 1910 General Industry > S Electrical > 1910.305 Wiring Methods, Components, and Equipment for General Use > 1910.305(j) Equipment for General Use > 1910.305(j)(3) Appliances > 1910.305(j)(3)(iii)
1910.304(g)(6)(vi)(B) Electrical,
If operated at over 150 volts to ground, except for guarded motors and metal frames of electrically heated appliances if the appliance frames ...
OSHA 1910 General Industry > S Electrical > 1910.304 Wiring Design and Protection > 1910.304(g) Grounding > 1910.304(g)(6) Supports, Enclosures, and Equipment to Be Grounded > 1910.304(g)(6)(vi) > 1910.304(g)(6)(vi)(B)
1910.304(g) Electrical, Grounding
for guarded motors and metal frames of electrically heated appliances if the appliance frames are permanently and effectively insulated from ground ...
OSHA 1910 General Industry > S Electrical > 1910.304 Wiring Design and Protection > 1910.304(g) Grounding