// CODE SNIPPET
(C) Motor Outlets
Related Code Sections
(C) Wiring and Protection, Motor Outlets
Loads for motor outlets shall be calculated in accordance with the requirements in 430.22, 430.24, and 440.6 ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 220 Branch-Circuit, Feeder, and Service Load Calculations > 220.14 Other Loads — All Occupancies > (C) Motor Outlets
(C) Special Equipment, GFCI Protection
Outlets supplying all pool motors on branch circuits rated 150 volts or less to ground and 60 amperes or less, single-or 3-phase, shall be provided ...
National Electrical Code 2020 of Minnesota > 6 Special Equipment > 680 Swimming Pools, Fountains, and Similar Installations > 680.21 Motors > (C) GFCI Protection
18.104.22.168.1 Installation Requirements,
For all types of sprinkler systems employing water motor-operated alarms, a listed 3 / 4 in. (20 mm) strainer shall be installed at the alarm ...
Standard for the Installation of Sprinkler Systems 2016 of Minnesota > 8 Installation Requirements > 8.17 System Attachments > 8.17.1* Sprinkler Alarms/Waterflow Alarms > 22.214.171.124* Attachments — Mechanically Operated > 126.96.36.199.1
(D) Special Occupancies, General Appliances
be not over 50 percent of the circuit rating if lighting outlets (receptacles, other than kitchen, dining area, and laundry, considered as lighting outlets ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 550 Mobile Homes, Manufactured Homes, and Mobile Home Parks > 550.12 Branch Circuits > (D) General Appliances