UpCodes logo
Go To Full Code Chapter
A disconnecting means shall be provided in the supply circuit for each motor-generator arc welder, and for each AC transformer and DC rectifier arc welder which is not equipped with a disconnect mounted as an integral part of the welder.

Related Code Sections

1926.404(f)(1)(ii) Electrical, Two-Wire DC Systems
Two-wire DC systems operating at over 50 volts through 300 volts between conductors shall be grounded unless they are rectifier-derived from an AC ...
1926.351 Welding and Cutting, Arc Welding and Cutting
Any current-carrying parts passing through the portion of the holder which the arc welder or cutter grips in his hand, and the outer surfaces ...
1926.353(d)(1)(ii) Welding and Cutting,
When two or more welders are exposed to each other's arc, filter lens goggles of a suitable type, meeting the requirements of Subpart E of this part ...
1926.353(d) Welding and Cutting, Inert-Gas Metal-Arc Welding
the requirements of Subpart E of this part. When two or more welders are exposed to each other's arc, filter lens goggles of a suitable type, meeting ...