// CODE SNIPPET
8-806.2 Moisture Protection
JUMP TO FULL CODE CHAPTER
Provisions shall be in-place to protect adobe structures from deterioration due to moisture penetration. Adobe shall be maintained in reasonably good condition. Particular attention shall be given to moisture content of adobe walls. Unmaintained walls or ruins shall be evaluated for safety based on their condition and stability. Additional protection measures may be appropriate subject to the concurrence of the enforcing agency.
Related Code Sections
8-806.2 Archaic Materials and Methods of Construction, Moisture Protection
Provisions shall be in-place to protect adobe structures from deterioration due to moisture penetration. Adobe shall be maintained in reasonably good ...
California Historical Building Code 2016 > 8-8 Archaic Materials and Methods of Construction > 8-806 Adobe > 8-806.2 Moisture Protection
8-806.2 Archaic Materials and Methods of Construction, Moisture Protection
Provisions shall be in-place to protect adobe structures from deterioration due to moisture penetration. Adobe shall be maintained in reasonably good ...
California Historical Building Code 2019 > 8-8 Archaic Materials and Methods of Construction > 8-806 Adobe > 8-806.2 Moisture Protection
300.42 Wiring Methods and Materials, Moisture or Mechanical Protection for Metal-Sheathed Cables
Where cable conductors emerge from a metal sheath and where protection against moisture or physical damage is necessary, the insulation ...
California Electrical Code 2019 > 3 Wiring Methods and Materials > 300 General Requirements for Wiring Methods and Materials > 300.42 Moisture or Mechanical Protection for Metal-Sheathed Cables
(C) Wiring Methods and Materials, Cinder Fill
IMC shall be permitted to be installed in or under cinder fill where subject to permanent moisture where protected on all sides by a layer ...
California Electrical Code 2019 > 3 Wiring Methods and Materials > 342 Intermediate Metal Conduit: Type IMC > 342.10 Uses Permitted > (C) Cinder Fill
(C) Wiring Methods and Materials, Cinder Fill
Galvanized steel and stainless steel EMT shall be permitted to be installed in cinder concrete or cinder fill where subject to permanent moisture ...
California Electrical Code 2019 > 3 Wiring Methods and Materials > 358 Electrical Metallic Tubing: Type EMT > 358.10 Uses Permitted > (C) Cinder Fill