// CODE SNIPPET
(J) Module Connection Arrangement
Related Code Sections
(J) Special Equipment, Module Connection Arrangement
The connection to a module or panel shall be arranged so that removal of a module or panel from a PV source circuit does not interrupt a grounded ...
National Electrical Code 2014 of Alabama > 6 Special Equipment > 690 Solar Photovoltaic (PV) Systems > 690.31 Methods Permitted > (J) Module Connection Arrangement
126.96.36.199* Installation Requirements, Arrangement
connection shall be on the system side of the water supply check valve ...
Standard for the Installation of Sprinkler Systems 2013 of Alabama > 8 Installation Requirements > 8.17 System Attachments > 8.17.2* Fire Department Connections > 188.8.131.52* Arrangement
24.1.6 Water Supplies, Arrangement
The connection between the system piping and underground piping shall be made with a suitable transition piece and shall be properly strapped ...
Standard for the Installation of Sprinkler Systems 2013 of Alabama > 24 Water Supplies > 24.1 General > 24.1.6 Arrangement
26.4.6 Marine Systems, Bath Modules
Sprinklers shall be installed in bath modules (full room modules) constructed with combustible materials, regardless of room fire load ...
Standard for the Installation of Sprinkler Systems 2013 of Alabama > 26 Marine Systems > 26.4 Installation Requirements > 26.4.6 Bath Modules
23.12.2 Protected Premises Fire Alarm Systems,
Relays or modules providing transmission of trouble signals to a supervising station shall be arranged to provide fail-safe operation ...
National Fire Alarm and Signaling Code 2013 of Alabama > 23 Protected Premises Fire Alarm Systems > 23.12 Off-Premises Signals > 23.12.2