// CODE SNIPPET
808.11 Minimum Water Envelope
JUMP TO FULL CODE CHAPTER
Manufactured diving equipment installation and use instructions shall be provided by the diving equipment manufacturer and shall specify the minimum water dimensions required for each diving board and diving stand combination. The board manufacturer shall indicate the water envelope type by dimensionally relating their products to Point A on the water envelopes as shown in Figure 804.1 and Table 804.1. The board manufacturer shall specify which boards fit on the design pool geometry types as indicated in Table 804.1.
Related Code Sections
808.11 Permanent Inground Residential Swimming Pools, Minimum Water Envelope
water dimensions required for each diving board and diving stand combination. The board manufacturer shall indicate the water envelope type ...
Swimming Pool and Spa Code 2015 of Washington > 8 Permanent Inground Residential Swimming Pools > 808 Diving Equipment > 808.11 Minimum Water Envelope
808.11 Permanent Inground Residential Swimming Pools, Minimum Water Envelope
water dimensions required for each diving board and diving stand combination. The board manufacturer shall indicate the water envelope type ...
Swimming Pool and Spa Code 2018 of Washington > 8 Permanent Inground Residential Swimming Pools > 808 Diving Equipment > 808.11 Minimum Water Envelope
322.2 General Compliance, Outside Diving Envelope
Where installed, steps and ladders shall be located outside of the minimum diving water envelope as indicated in Figure 322.2. FIGURE 322.2 ...
Swimming Pool and Spa Code 2018 of Washington > 3 General Compliance > 322 Ladders and Recessed Treads > 322.2 Outside Diving Envelope
322.2 General Compliance, Outside Diving Envelope
Where installed, steps and ladders shall be located outside of the minimum diving water envelope as indicated in Figure 322.2. FIGURE ...
Swimming Pool and Spa Code 2015 of Washington > 3 General Compliance > 322 Ladders and Recessed Treads > 322.2 Outside Diving Envelope
411.1.5 Public Swimming Pools, Diving Envelope
accessories shall be located outside of the minimum diving water envelope indicated in Figure 322.2 ...
Swimming Pool and Spa Code 2015 of Washington > 4 Public Swimming Pools > 411 Special Features > 411.1 Entry and Exit > 411.1.5 Diving Envelope