• Codes
  • Features
  • Pricing
  • Login
  • Sign Up
Sign Up
Login
  • Code Library
  • Features
  • Pricing
  • About
  • Careers
  • Contact
  • Terms
  • Privacy
Sign Up
Upgrade to premium.
Simplify code analysis.


START 2 WEEK FREE TRIAL LEARN ABOUT PREMIUM
// CODE SNIPPET

AW104.2 Minimum Size Requirements

Los Angeles Residential Code > W Areas Protected by the Facilities of the Central Valley Flood Protection Plan > AW104 Evacuation Locations > AW104.2 Minimum Size Requirements
JUMP TO FULL CODE CHAPTER

Evacuation locations shall provide a minimum gross floor area of 7 square feet (0.65 m2) per occupant, based on the occupant load of the portions of the building that are below WSEL200. The area provided shall be adequate to accommodate the occupant load of the upper levels as well as the anticipated occupant load from the area below the WSEL200.

Related Code Sections


AW104.2 Areas Protected by the Facilities of the Central Valley Flood Protection Plan, Minimum Size Requirements
Evacuation locations shall provide a minimum gross floor area of 7 square feet (0.65 m 2 ) per occupant, based on the occupant load of the portions ...
Los Angeles Residential Code > W Areas Protected by the Facilities of the Central Valley Flood Protection Plan > AW104 Evacuation Locations > AW104.2 Minimum Size Requirements
K104.3 Group R-3 and Group R-3.1 Occupancies Protected by the Facilities of the Central Valley Flood Protection Plan, Minimum Size Requirements
Evacuation locations shall provide a minimum gross floor area of 7 square feet (0.65 m 2 ) per occupant, based on the occupant load of the portions ...
Los Angeles Building Code > K Group R-3 and Group R-3.1 Occupancies Protected by the Facilities of the Central Valley Flood Protection Plan > K104 Evacuation Locations > K104.3 Minimum Size Requirements
A113.7 Guidelines for the Seismic Retrofit of Existing Buildings, Veneer
brick veneer to brick backing may be acceptable, provided the ties are in good condition and conform to the following minimum size and material ...
Los Angeles Existing Building Code > A Guidelines for the Seismic Retrofit of Existing Buildings > A113 Detailed System Design Requirements > A113.7 Veneer
R606.12.3.2 Wall Construction, Minimum Reinforcement Requirements for Masonry Walls
be uniformly distributed. Table R606.12.3.2 shows the minimum reinforcing bar sizes required for varying thicknesses of masonry walls. The maximum spacing ...
Los Angeles Residential Code > 6 Wall Construction > R606 General Masonry Construction > R606.12 Seismic Requirements > R606.12.3 Seismic Design Category D0 or D1 > R606.12.3.2 Minimum Reinforcement Requirements for Masonry Walls
1009.6.3 Means of Egress, Size
occupant load served by the area of refuge. Such wheelchair spaces shall not reduce the means of egress minimum width or required capacity. Access to any ...
Los Angeles Building Code > 10 Means of Egress > 1009 Accessible Means of Egress > 1009.6 Areas of Refuge > 1009.6.3 Size
Calculate Code Requirements

Code Calculators automatically generate a detailed list of requirements.

Upgrade to premium to access these features.


LEARN MORE
About UpCodes

UpCodes provides an intuitive resource to navigate building regulations.

Codes are organized by jurisdiction to help you understand which regulations apply to your project.


Find Your Codes
Contact Us Privacy Terms