// CODE SNIPPET
(1) Minimum Number and Supply
Related Code Sections
(1) Special Occupancies, Minimum Number and Supply
Each patient bed location shall be provided with a minimum of eight receptacles ...
National Electrical Code 2020 of Minnesota > 5 Special Occupancies > 517 Health Care Facilities > 517.18 Category 2 (General Care) Spaces > (B) Patient Bed Location Receptacles > (1) Minimum Number and Supply
(1) Equipment for General Use, Factory-Wired
, frequency, number of phases, minimum supply circuit conductor ampacity, and the maximum ampere rating of the circuit short-circuit and ground-fault ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 430 Motors, Motor Circuits, and Controllers > 430.7 Marking on Motors and Multimotor Equipment > (D) Multimotor and Combination-Load Equipment > (1) Factory-Wired
(B) Equipment for General Use, Multimotor and Combination-Load Equipment
and number of phases, minimum supply circuit conductor ampacity, the maximum rating of the branch-circuit short-circuit and ground-fault protective ...
National Electrical Code 2020 of Minnesota > 4 Equipment for General Use > 440 Air-Conditioning and Refrigerating Equipment > 440.4 Marking on Hermetic Refrigerant Motor-Compressors and Equipment > (B) Multimotor and Combination-Load Equipment
(A) Wiring and Protection, Number of Branch Circuits
The minimum number of branch circuits shall be determined from the total calculated load and the size or rating of the circuits used. In all ...
National Electrical Code 2020 of Minnesota > 2 Wiring and Protection > 210 Branch Circuits > 210.11 Branch Circuits Required > (A) Number of Branch Circuits
184.108.40.206.1 Design Approaches,
Where the design area consists of a building service chute supplied by a separate riser, the maximum number of sprinklers that needs to be calculated ...
Standard for the Installation of Sprinkler Systems 2016 of Minnesota > 11 Design Approaches > 11.2 Occupancy Hazard Fire Control Approach for Spray Sprinklers > 11.2.3 Water Demand Requirements — Hydraulic Calculation Methods > 220.127.116.11 Special Design Areas > 18.104.22.168.1