// CODE SNIPPET
1910.94(c)(1)(iv) Minimum Maintained Velocity
JUMP TO FULL CODE CHAPTER
Minimum maintained velocity is the velocity of air movement which must be maintained in order to meet minimum specified requirements for health and safety.
Related Code Sections
1910.94(c)(1)(iv) Occupational Health and Environmental Control, Minimum Maintained Velocity
Minimum maintained velocity is the velocity of air movement which must be maintained in order to meet minimum specified requirements for health ...
OSHA 1910 General Industry > G Occupational Health and Environmental Control > 1910.94 Ventilation > 1910.94(c) Spray Finishing Operations > 1910.94(c)(1) Definitions Applicable to This Paragraph > 1910.94(c)(1)(iv) Minimum Maintained Velocity
1910.94 Occupational Health and Environmental Control, Ventilation
areas. Minimum maintained velocity is the velocity ...
1910.252(c)(3) Welding, Cutting, and Brazing, Local Exhaust Hoods and Booths
with a rate of air-flow sufficient to maintain a velocity in the direction of the hood of 100 linear feet (30 m) per minute in the zone of welding when ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General Requirements > 1910.252(c) Health Protection and Ventilation > 1910.252(c)(3) Local Exhaust Hoods and Booths
1910.252(c)(3)(i) Welding, Cutting, and Brazing, Hoods
sufficient to maintain a velocity in the direction of the hood of 100 linear feet (30 m) per minute in the zone of welding when the hood is at its most ...
OSHA 1910 General Industry > Q Welding, Cutting, and Brazing > 1910.252 General Requirements > 1910.252(c) Health Protection and Ventilation > 1910.252(c)(3) Local Exhaust Hoods and Booths > 1910.252(c)(3)(i) Hoods
1910.1027(f)(3)(i) Toxic and Hazardous Substances,
velocity, duct velocity, or static pressure shall be made as necessary to maintain its effectiveness ...
OSHA 1910 General Industry > Z Toxic and Hazardous Substances > 1910.1027 Cadmium > 1910.1027(f) Methods of Compliance > 1910.1027(f)(3) Mechanical Ventilation > 1910.1027(f)(3)(i)