// CODE SNIPPET

1404.3.4 Minimum Clear Airspaces and Vented Openings for Vented Cladding

Building Code 2018 of Illinois > 14 Exterior Walls > 1404 Installation of Wall Coverings > 1404.3 Vapor Retarders > 1404.3.4 Minimum Clear Airspaces and Vented Openings for Vented Cladding

JUMP TO FULL CODE CHAPTER

For the purposes of this section, vented cladding shall include the following minimum clear airspaces:

Vinyl, polypropylene or horizontal aluminum siding applied over a weather-resistive barrier as specified in this chapter.
Brick veneer with a clear airspace as specified in this code.
Other approved vented claddings.

Related Code Sections

1404.3.4 Exterior Walls, Minimum Clear Airspaces and Vented Openings for Vented Cladding

For the purposes of this section, vented cladding shall include the following minimum clear airspaces: Vinyl, polypropylene or horizontal aluminum ...

Building Code 2018 of Illinois > 14 Exterior Walls > 1404 Installation of Wall Coverings > 1404.3 Vapor Retarders > 1404.3.4 Minimum Clear Airspaces and Vented Openings for Vented Cladding

410.2.7.1 Special Detailed Requirements Based on Occupancy and Use, Roof Vents

Two or more vents constructed to open automatically by approved heat-activated devices and with an aggregate clear opening area of not less than 5 ...

Building Code 2018 of Illinois > 4 Special Detailed Requirements Based on Occupancy and Use > 410 Stages, Platforms and Technical Production Areas > 410.2 Stages > 410.2.7 Stage Ventilation > 410.2.7.1 Roof Vents

3003.1.4 Elevators and Conveying Systems, Venting

Where standby power is connected to elevators, the machine room ventilation or air conditioning shall be connected to the standby power source ...

Building Code 2018 of Illinois > 30 Elevators and Conveying Systems > 3003 Emergency Operations > 3003.1 Standby Power > 3003.1.4 Venting

3005.2 Elevators and Conveying Systems, Venting

Elevator machine rooms, machinery spaces that contain the driving machine, and control rooms or spaces that contain the operation or motion controller ...

Building Code 2018 of Illinois > 30 Elevators and Conveying Systems > 3005 Machine Rooms > 3005.2 Venting

480.11 Equipment for General Use, Vents

Each vented cell shall be equipped with a flame arrester. Informational Note: A flame arrester prevents destruction of the cell due to ignition ...

National Electrical Code 2017 of Illinois > 4 Equipment for General Use > 480 Storage Batteries > 480.11 Vents