// CODE SNIPPET
1907.2 Minimum Bend Diameters
Related Code Sections
1907.2 Concrete, Minimum Bend Diameters
Minimum reinforcement bend diameters utilized in concrete construction shall comply with ACI 318, Section 7.2 ...
Building Code 2009 of Alabama > 19 Concrete > 1907 Details of Reinforcement > 1907.2 Minimum Bend Diameters
25.3.2 Reinforcement Details,
Minimum inside bend diameters for bars used as transverse reinforcement and standard hooks for bars used to anchor stirrups, ties, hoops, and spirals ...
Building Code Requirements for Structural Concrete of Alabama > 25 Reinforcement Details > 25.3 Standard Hooks, Seismic Hooks, Crossties, and Minimum Inside Bend Diameters > 25.3.2
336.24 Wiring Methods and Materials, Bending Radius
Bends in Type TC cable shall be made so as not to damage the cable. For Type TC cable without metal shielding, the minimum bending radius shall ...
National Electrical Code 2014 of Alabama > 3 Wiring Methods and Materials > 336 Power and Control Tray Cable: Type TC > 336.24 Bending Radius
354.24 Wiring Methods and Materials, Bends — How Made
radius of the curve of the centerline of such bends shall not be less than shown in Table 354.24. Table 354.24 Minimum Bending Radius for Nonmetallic ...
National Electrical Code 2014 of Alabama > 3 Wiring Methods and Materials > 354 Nonmetallic Underground Conduit With Conductors: Type NUCC > 354.24 Bends — How Made
300.34 Wiring Methods and Materials, Conductor Bending Radius
conductors, the minimum bending radius is 12 times the diameter of the individually shielded conductors or 7 times the overall diameter, whichever ...
National Electrical Code 2014 of Alabama > 3 Wiring Methods and Materials > 300 General Requirements for Wiring Methods and Materials > 300.34 Conductor Bending Radius