// CODE SNIPPET
10.6.1 Minimum and Maximum Longitudinal Reinforcement
JUMP TO FULL CODE CHAPTER
Related Code Sections
10.6.1 Columns, Minimum and Maximum Longitudinal Reinforcement
For nonprestressed columns and for prestressed columns with average f pe < 225 psi , area of longitudinal reinforcement shall be at least ...
Building Code Requirements for Structural Concrete of New York State > 10 Columns > 10.6 Reinforcement Limits > 10.6.1 Minimum and Maximum Longitudinal Reinforcement
1810.1.2.1 Soils and Foundations, Reinforcement in Seismic Design Category C
diameter maximum spacing. Transverse confinement reinforcement with a maximum spacing of 6 inches (152 mm) or 8-longitudinal-bar diameters, whichever ...
2010 Building Code of NY > 18 Soils and Foundations > 1810 Cast-In-Place Concrete Pile Foundations > 1810.1 General > 1810.1.2 Reinforcement > 1810.1.2.1 Reinforcement in Seismic Design Category C
1809.2.2.2 Soils and Foundations, Minimum Reinforcement
The minimum amount of longitudinal reinforcement shall be 0.8 percent of the concrete section and shall consist of at least four bars ...
2010 Building Code of NY > 18 Soils and Foundations > 1809 Driven Pile Foundations > 1809.2 Precast Concrete Piles > 1809.2.2 Precast Nonprestressed Piles > 1809.2.2.2 Minimum Reinforcement
R610.9 Wall Construction, Reinforcement
Glass unit masonry panels shall have horizontal joint reinforcement spaced a maximum of 16 inches (406 mm) on center located in the mortar bed joint ...
8.7.2 Two-Way Slabs, Flexural Reinforcement Spacing
For nonprestressed solid slabs, maximum spacing s of deformed longitudinal reinforcement shall be the lesser of 2 h and 18 in. at critical ...
Building Code Requirements for Structural Concrete of New York State > 8 Two-Way Slabs > 8.7 Reinforcement Detailing > 8.7.2 Flexural Reinforcement Spacing