// CODE SNIPPET
2103.13.7.1 Mill Galvanized
JUMP TO FULL CODE CHAPTER
Mill galvanized coatings shall be applied as follows:
- For joint reinforcement, wall ties, anchors and inserts, a minimum coating of 0.1 ounce per square foot (31 g/m2) complying with the requirements of ASTM A 641 shall be applied.
- For sheet metal ties and sheet metal anchors, a minimum coating complying with Coating Designation G-60 according to the requirements of ASTM A 653 shall be applied.
- For anchor bolts, steel plates or bars not exposed to the earth, weather or a mean relative humidity exceeding 75 percent, a coating is not required.
Related Code Sections
2103.13.7.1 Masonry, Mill Galvanized
Mill galvanized coatings shall be applied as follows: For joint reinforcement, wall ties, anchors and inserts, a minimum coating of 0.1 ounce per ...
2010 Building Code of NY > 21 Masonry > 2103 Masonry Construction Materials > 2103.13 Metal Reinforcement and Accessories > 2103.13.7 Corrosion Protection > 2103.13.7.1 Mill Galvanized
2006.1 Manufacture of Organic Coatings, Mills
Mills, operating with close clearances, which process flammable and heat-sensitive materials, such as nitrocellulose, shall be located in a detached ...
2010 Fire Code of NY > 20 Manufacture of Organic Coatings > 2006 Process Mills and Kettles > 2006.1 Mills
2906.1 Manufacture of Organic Coatings, Mills
Mills, operating with close clearances, which process flammable and heat-sensitive materials, such as nitrocellulose, shall be located in a detached ...
Fire Code 2015 of New York State > 29 Manufacture of Organic Coatings > 2906 Process Mills and Kettles > 2906.1 Mills
2906.1 Manufacture of Organic Coatings, Mills
Mills, operating with close clearances, which process flammable and heat-sensitive materials, such as nitrocellulose, shall be located in a detached ...
2020 Fire Code of NYS > 29 Manufacture of Organic Coatings > 2906 Process Mills and Kettles > 2906.1 Mills
418.3 Special Detailed Requirements Based on Occupancy and Use, Process Mills
Mills operating with close clearances and that process flammable and heat-sensitive materials, such as nitrocellulose, shall be located ...
2020 Building Code of New York State > 4 Special Detailed Requirements Based on Occupancy and Use > 418 Organic Coatings > 418.3 Process Mills