// CODE SNIPPET
1703.5.4 Method of Labeling
JUMP TO FULL CODE CHAPTER
Information required to be permanently identified on the product, material or assembly shall be acid etched, sand blasted, ceramic fired, laser etched, embossed or of a type that, once applied, cannot be removed without being destroyed.
Related Code Sections
1703.5.4 Special Inspections and Tests, Method of Labeling
Information required to be permanently identified on the product, material or assembly shall be acid etched, sand blasted, ceramic fired, laser etched ...
Building Code 2018 of Illinois > 17 Special Inspections and Tests > 1703 Approvals > 1703.5 Labeling > 1703.5.4 Method of Labeling
(4) Special Equipment, Marking and Labeling Methods and Locations
The labels or markings shall be visible after installation. The labels shall be reflective, and all letters shall be capitalized and shall ...
National Electrical Code 2017 of Illinois > 6 Special Equipment > 690 Solar Photovoltaic (PV) Systems > 690.31 Methods Permitted > (G) Photovoltaic System Direct Current Circuits on or in a Building > (4) Marking and Labeling Methods and Locations
(B) Special Equipment, MDCs Connected to Branch Circuits and Feeders
and labeled MDC or the short-circuit current rating established utilizing an approved method. Exception: This requirement shall not apply to listed ...
National Electrical Code 2017 of Illinois > 6 Special Equipment > 646 Modular Data Centers > 646.7 Short-Circuit Current Rating > (B) MDCs Connected to Branch Circuits and Feeders
(B) General, Field-Applied Hazard Markings
be permanently affixed to the equipment or wiring method and shall not be handwritten. Exception to (2): Portions of labels or markings that are variable ...
National Electrical Code 2017 of Illinois > 1 General > 110 Requirements for Electrical Installations > 110.21 Marking > (B) Field-Applied Hazard Markings
(B) Special Occupancies, Wiring
Raceways, cable trays, and other wiring methods for intrinsically safe system wiring shall be identified with permanently affixed labels ...
National Electrical Code 2017 of Illinois > 5 Special Occupancies > 504 Intrinsically Safe Systems > 504.80 Identification > (B) Wiring