// CODE SNIPPET
E3906.10 Metal Covers and Plates
JUMP TO FULL CODE CHAPTER
Metal covers and plates shall be grounded.
Related Code Sections
E3906.10 Power and Lighting Distribution, Metal Covers and Plates
Metal covers and plates shall be grounded ...
Residential Code 2012 of South Holland, IL > 39 Power and Lighting Distribution > E3906 Installation of Boxes, Conduit Bodies and Fittings > E3906.10 Metal Covers and Plates
E4002.5 Devices and Luminaires, Position of Receptacle Faces
(0.381 mm) from metal face plates. Faceplates shall be installed so as to completely cover the opening and seat against the mounting surface ...
Residential Code 2012 of South Holland, IL > 40 Devices and Luminaires > E4002 Receptacles > E4002.5 Position of Receptacle Faces
F101.2 Rodentproofing, Foundation Wall Ventilation Openings
Foundation wall ventilator openings shall be covered for their height and width with perforated sheet metal plates no less than 0.070 inch (1.8 mm ...
Building Code 2012 of South Holland, IL > F Rodentproofing > F101 General > F101.2 Foundation Wall Ventilation Openings
R408.2 Foundations, Openings for Under-Floor Ventilation
metal plates not less than 0.070 inch (1.8 mm) thick. Expanded sheet metal plates not less than 0.047 inch (1.2 mm) thick. Cast-iron grill ...
Residential Code 2012 of South Holland, IL > 4 Foundations > R408 Under-Floor Space > R408.2 Openings for Under-Floor Ventilation
R602.6.1 Wall Construction, Drilling and Notching of Top Plate
of the top plate by more than 50 percent of its width, a galvanized metal tie not less than 0.054 inch thick (1.37 mm) (16 ga) and 1 1 / 2 inches (38 mm ...
Residential Code 2012 of South Holland, IL > 6 Wall Construction > R602 Wood Wall Framing > R602.6 Drilling and Notching of Studs > R602.6.1 Drilling and Notching of Top Plate