// CODE SNIPPET
[BS] 1403.5 Metal
JUMP TO FULL CODE CHAPTER
Aluminum siding shall conform to the requirements of AAMA 1402.
Copper shall conform to the requirements of ASTM B370.
Lead-coated copper shall conform to the requirements of ASTM B101.
Related Code Sections
1403.5 Exterior Walls, Metal
Exterior walls constructed of cold-formed steel, structural steel or aluminum shall be designed in accordance with Chapters 22 and 20, respectively ...
1404.11 Exterior Walls, Metal Veneers
Veneers of metal shall be fabricated from approved corrosion-resistant materials or shall be protected front and back with porcelain enamel ...
Building Code 2018 of Illinois > 14 Exterior Walls > 1404 Installation of Wall Coverings > 1404.11 Metal Veneers
(C) Wiring and Protection, Structural Metal
Exposed structural metal that is interconnected to form a metal building frame and is not intentionally grounded or bonded and is likely to become ...
National Electrical Code 2017 of Illinois > 2 Wiring and Protection > 250 Grounding and Bonding > 250.104 Bonding of Piping Systems and Exposed Structural Metal > (C) Structural Metal
(A) Wiring and Protection, Metal Interconnections
A metal interconnection shall be made to the secondary grounded circuit conductor or the secondary circuit grounding electrode conductor ...
National Electrical Code 2017 of Illinois > 2 Wiring and Protection > 280 Surge Arresters, Over 1000 Volts > 280.24 Interconnections > (A) Metal Interconnections
314.4 Wiring Methods and Materials, Metal Boxes
Metal boxes shall be grounded and bonded in accordance with Parts I, IV, V, VI, VII, and X of Article 250 as applicable, except as permitted ...
National Electrical Code 2017 of Illinois > 3 Wiring Methods and Materials > 314 Outlet, Device, Pull, and Junction Boxes; Conduit Bodies; Fittings; And Handhole Enclosures > 314.4 Metal Boxes