// CODE SNIPPET
(A) Medium-Power Circuits
JUMP TO FULL CODE CHAPTER
Medium-power network-powered broadband communications circuits located outside and entering buildings shall be installed using Type BMU, Type BM, or Type BMR network-powered broadband communications medium-power cables.
Related Code Sections
(A) Communications Systems, Medium-Power Circuits
Medium-power network-powered broadband communications circuits located outside and entering buildings shall be installed using Type BMU, Type BM ...
National Electrical Code 2020 of Minnesota > 8 Communications Systems > 830 Network-Powered Broadband Communications Systems > 830.40 Entrance Cables > (A) Medium-Power Circuits
(G) Special Conditions, Other Applications
light, power, Class 1, non-power-limited fire alarm, or medium-power network-powered broadband communications circuits unless one of the following ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 760 Fire Alarm Systems > 760.136 Separation From Electric Light, Power, Class 1, NPLFA, and Medium-Power Network-Powered Broadband Communications Circuit Conductors > (G) Other Applications
(I) Special Conditions, Other Applications
, power, Class 1 non-power-limited fire alarm or medium power network-powered broadband communications circuits unless one of the following conditions ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 725 Class 1, Class 2, and Class 3 Remote- Control, Signaling, and Power-Limited Circuits > 725.136 Separation From Electric Light, Power, Class 1, Non- Power-Limited Fire Alarm Circuit Conductors, and Medium- Power Network-Powered Broadband Communications Cables > (I) Other Applications
(A) Communications Systems, Separation From Other Conductors
Fire Alarm, and Medium-Power Network-Powered Broadband Communications Circuits . Coaxial cable shall not be placed in any raceway, compartment, outlet ...
National Electrical Code 2020 of Minnesota > 8 Communications Systems > 820 Community Antenna Television and Radio Distribution Systems > 820.133 Installation of Coaxial Cables and Equipment > (A) Separation From Other Conductors
(A) Special Conditions, In Cable Trays and Raceways
ITC, or medium-power network-powered broadband communications circuits, unless all of the conductors of electric light, power, Class 1, non-power ...
National Electrical Code 2020 of Minnesota > 7 Special Conditions > 770 Optical Fiber Cables > 770.133 Installation of Optical Fibers and Electrical Conductors > (A) In Cable Trays and Raceways